CEMB N330, Руководство пользователя

Страница: 22 / 160

4 - 2 OVERALL vibrometer mode
Press to start the measurement; the instrument acquires continuously, press again to
freeze the acquisition.
Note:
The measurement unit, the unit mode and the frequency range are set using the
MEASURE SETUP function (see
Setup mode 13-1 ), freely modifiable using the specific
function or the command menu.
Note:
The sensitivity set for the sensor in use is shown in the upper right area of the display.
To change its value, see
13- 2 Sensor “A” Sensitivity / Sensor “B” Sensitivity .
Note:
With measurement from channel “B” enabled (see 13-1 Sensor setup ), the key
changes the channel shown on the display, switching from channel “A” to channel “B”
and vice versa.
The displayed channel can be identified by the symbol placed in the upper left corner
of the display (see
2-3 Screen description ).
Caution:
In the case of sensor not connected to the acquisition channel, an error message on
the display warns the operator.