CEMB N330, Руководство пользователя

Страница: 78 / 160

11 - 8 Rotors balancing mode

Test run: known weight in known position
After to be done the initial run (see 11.6 – Initial run ), press (NEXT) to go to the
next step.
single plane balancing dual plane balancing
test weight on plane “P1”
Set the value of the test weight to be used (grams) and its position with respect to the
marker positioned on the impeller (° deg).
Move between the parameters to be set using the keys and . Set the choices
using the keys and .
Enter the values to be set; every single number must be selected by moving with the
"arrows" keys inside the numeric keypad visible on the display, confirming the choice
by pressing .
Key (DONE) to confirm the entered data.
Note:
Move between the available choices using the and keys and .
Confirm each setup step using the key .
Back to the previous step with (BACK).
Note:
With the ROTOR SETTINGS enabled, the suggested test weight value is
reported based on the balancing tolerance, according to ISO 21940-11 .
The suggested value is however editable, following the steps shown in the
current paragraph.