CEL-MAR ADA-13020, Руководство пользователя

Страница: 26 / 28

Order example:
Product symbol: ADA-13020-1-1-1-2-3
1 – basic electronic version,
1 – current loop voltage 24VDC,
1 – current loop type ± 20mA,
2 – galvanic isolation 1kV=,
3 – cover without inlets, plug-in screw terminal block.
10. SPECIFICATION
TECHNICAL DATA
Transmission Parameters
Net/ Interface ETHERNET Current Loop
Connector RJ45 Screw terminal, max. wire Ø 2,5mm 2 .
Line length LAN up to 150 m
Depend on baud rate up to few hundred
meters
Max. number of connected device Depend on addressing type in network
2 point-to-point or 15 in Current Loop
network
Max. baud rate 10/100 Mbit/s
38,4 kbps (depend on length Current Loop
line)
Transmission line
4-pair twisted cable, UTP
4x2x0,5(24AWG), shield inside large
interferences (STP 4x2x0,5(24AWG))
2-pair twisted cable, UTP Nx2x0,5(24AWG),
shield inside large interferences (STP
Nx2x0,5(24AWG))
Standards IEEE 802.3 0-20mA(TTY), +/-20mA
Transmission type Asynchronism half duplex or full duplex,
Optical Signalization
•
PWD – green LED (power supply)
•
RX - red LED data reception on Current Loop port,
•
TX - yellow LED data transmission via Current Loop port,
Electrical Parameters
Power requirements 10 - 24 – 30 V DC
Power Cable Recommended length of power cable – up to 3m
Power 3W
Protection from reverse power polarization YES
Galvanic Isolation
1kV= or 3kV= (between power circuit and ETHERNET signal line)
1kV= or 3kV= (between power circuit and Current Loop signal line)
Optoisolation ~3kV= (between signal lines Current Loop and ETHERNET)
Electromagnetic compatibility
Resistance to disruptions PN-EN 55024.
Emission of disruptions PN-EN 55022.
Safety requiring According to the PN-EN60950 norm.
Environment Commercial and light industrial.
Environmental Parameters
Operating temperature -30 ÷ 60°C
Humidity 5 ÷ 95% - non-condensing
Storage temperature -40 ÷ 70°C
Casing
Dimensions 53mm x 90mm x 62mm,
Material Noryl UL. 94 V-O
Degree of casing protection IP40
Degree of terminal protection IP20
Weight 0,10 kg
According to standards DIN EN50022, DIN EN43880
Location during work Free
Mounting method On the rail compliant with DIN35 / TS35 standard.
26
ADA-13020