Cedar Shed DOVER Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 15

Cedar Shed DOVER Скачать руководство пользователя страница 15

CEDAR SHED WARRANTY

GUARANTEE TO CUSTOMER

Congratulations on purchasing a quality New Zealand made Cedar Shed manufactured by Riverlea Group Limited. With proper care and attention this
product will offer you many years of use.

WARRANTY ON METAL CLADDING

Your new shed is guaranteed for the benefit of the original purchaser, against defective material or faulty workmanship for

fifteen years

from date of

purchase.

Riverlea Group Limited will, at its discretion, replace or repair any faulty or defective materials within this time on condition that due care

and maintenance has been carried out as detailed below.

TERMS AND CONDITIONS

This warranty does not cover Cedar sheds with steel roofing if it is installed outside the inland corrosion zone or areas where the

corrosion rate is more than 200g/m2 (as published by BRANZ)

1. The warranty does not cover damage or failure due to improper assembly.

2. This warranty does not cover damage through force majeure or other cause beyond the control of Riverlea Group Limited.

3. This warranty is void if maintenance as detailed below and in the assembly manual has not been adhered to.

4. This warranty does not cover natural variations, expansion, contractions as can be reasonably expected from a timber product.

Painting or coating of your Cedar Shed with a dark colour will cause increased timber temperature and movement which will render this warranty

null and void.

Beyond the exclusions above, Riverlea Group Limited will repair or replace the damaged or faulty product. The balance of the original warranty will
cover any repaired or replaced material.

Riverlea Group Limited will not be liable for any consequential loss or damage, labour or transport costs.

All claims must be made within 21 days of discovery.

MAINTENANCE

The following are the minimum maintenance requirements for Cedar Sheds manufactured by Riverlea Group Limited.

Please refer to your assembly

manual for more details.

Immediately coat all cedar walling cladding with

“

Endurance Cedar Wall Protector

”.

Cedar walls are to be regularly recoated according to application

instructions on the product packaging.

Immediately coat all cedar shingle roofing with

“

Endurance Cedar Shingle Protector

”

Cedar shingles are to be regularly recoated

according to application instructions on the product packaging.

All steel roofing is to be kept clean and free of debris

and washed annually with a hose and soft brush.

Timber floors, where supplied are to be kept out of direct water contact or runoff

The above guidelines will guarantee you a superior Cedar Shed that will offer you many years of outstanding usefulness.

Please visit http://www.riverleagroup.co.nz/warranty

-

garden

-

sheds to validate the Warranty on your shed.

Click on the Warranty Registration Link and complete all details.

If you are unable to access the computer, please phone us on 0800 438 274 and one of the customer services team will help you to activate the

warranty on your garden shed.

Many thanks, from the Team at Riverlea Group.

WARRANTY REGISTRATION

«
...
13
14
15

Содержание DOVER
















Отзывы:

Нет отзывов