background image

ENGLISH

32

7.  TROUBLESHOOTING

Problem

Solution

The robot does not start up

- The robot cannot operate when the battery is low. Allow it 

to charge before operating it.

- The room temperature is below 0 ºC or above 40 ºC. Opera-

te the robot in a room where the temperature is between 0 

and 40 ºC.

The robot cannot charge

Clean the charging terminals.

Make sure the power switch is turned on. 

The robot does not return to 

the charging base.

- There are many obstacles around the charging base, plea-

se place the charging base in an open and uncluttered area.

- The robot is too far from the charging base, place it closer 

and try again. 

The robot does not work 

properly

Turn the robot off, switch it off and turn it on again. 

The robot emits a strange 

noise during cleaning. 

The main brush, side brush or omnidirectional wheel may 

have foreign matters tangled, stop the robot and clear it up. 

The robot does not clean 

efficiently or dust leaks 

from the robot.

- The dust tank is full. Empty it and clear the HEPA filter if it 

is blocked. 

- The main brush is tangled with foreign matter, please clear 

it up. 

The robot could not connect 

to Wi-Fi

-The Wi-Fi signal is poor. Make sure the Wi-Fi signal is 

correct. 

- The Wi-Fi is unstable. Reset the router, check if there are 

any App updates and tray again.

The robot did not carry out 

the scheduled cleaning

Check if the robot is in Night mode and switch mode. The 

robot does not carry out scheduled cleaning cycles under 

this mode.

The robot does not return to 

the charging base after spot 

cleaning or after changing 

starting position. 

- The robot will map and calculate a new route after opera-

ting under spot cleaning or after having changed its starting 

position. 

If the charging base is very far away from the robot, it will 

not be able to charge back automatically. Put the robot back 

on the charging base manually.

8. TECHNICAL SPECIFICATIONS

Model: Conga Serie 3090
Reference No.: 05148/05149/05150
100-240 V, 50/60 Hz
Battery: 14.8 V, 3200 mAh
Made in China | Designed in Spain

Conga Serie 3090_Manual_GE.indd   32

1/8/18   10:45

Содержание Conga 3090 Series























Отзывы: