Cecilware GB5MF-IT, Руководство по эксплуатации, Страница: 16 / 33

10
27. If the Stop key is pressed the LCD screen will display the following:
Pressing the ▼ and ▲ keys simultaneously will cause all parameters to revert to default
values and the menu to display the following:
DEFAULT VALUES
ARE YOU SURE?
RESET SYSTEM
COMPLETED
DEFINITION OF SCREENS DURING NORMAL OPERATION:
1. Initialization Screen
Definition – This screen is displayed only during the first few seconds after “power-on”. The only purpose of this screen
is to display the System Software Title (DISPENSER) and Version Number (V #.##).
RESET SYSTEM
COMPLETED
2. Low Water Level Screen
Definition – This screen is displayed after the Initialization Screen during the initial filling of the water tank ( first fill ). Once
the water in the reservoir tank has reached the appropriate fill level this screen is retired.
PLEASE WAITLOW
WATER LEVEL
3.
Low Temperature Lockout Screen Definition – This screen is displayed when the Low Temperature Lockout feature
is ON and the present water temperature is below the Low Temperature Lockout trip point.
PLEASE WAITLOW
WATER TEMP.
4. System Rinse Lockout Screen
Definition – This screen is displayed when the Rinse Lockout feature is ON and all Hoppers have met the conditions for
Rinse Lockout. A Hopper will enter Rinse Lockout when the respective Hopper has dispensed but has not been rinsed
for a period of time greater than that defined by the Rinse Lockout Time. Since the system has no method of recording
elapsed time during “power-off”, the system will place all Hoppers in Rinse Lockout upon “power-on” as a sanitary
precaution.
PLEASE RINSE
TO CONTINUE
5. Rinse Screen
Definition – This screen appears when the Rinse Key is pressed while the system is waiting to dispense. If any of the
Dispense Keys are pressed while this screen is being displayed the system will rinse the Hopper corresponding to the
depressed key. If the Rinse Key is released while a Hopper is being rinsed this screen will remain until the rinse process
is complete.
PRESS AND
RELEASE
TO RINSE
6. Selection Screen
Definition – This screen is displayed along with a Dispense Screen while the system is waiting to dispense. This screen
alternates with a Dispense Screen every three seconds.
PLEASE SELECT
CHOICE OF DRINK
7. Portion Control Dispense Screen
Definition – This screen is displayed while the system is waiting to dispense if the Dispense Mode is set to Portion
Control. This screen alternates with the Selection Screen every three seconds.
PRESS AND
RELEASE
TO DISPENSE
8.
Free Flow Dispense Screen
Definition – This screen is displayed while the system is waiting to dispense if the Dispense Mode is set to Free Flow.
This screen alternates with the Selection Screen every three seconds.
PRESS AND HOLD
UNTIL 2/3 FULL
9.
Rinse Warning Screen
Definition – This screen appears when the Rinse Warning feature is ON and a Hopper (identified by @)
HOPPER # @MUST
BE RINSED
has dispensed but has not been rinsed for a period of time greater than that defined by (50 * Rinse Lockout Time) minutes.
For example: if the Rinse Lockout Time is 6 Hrs and the Rinse Warning feature is ON then the Rinse Warning will be triggered when a Hopper
is not rinsed for 300 minutes (5 hours). Triggering a Rinse Warning will cause the audible alarm to sound for two seconds and the Rinse
Warning Screen to be displayed for five seconds. The system will then revert back to normal operation. If the offending Hopper is not rinsed
after the first Rinse waning additional Rinse Warnings will be triggered every five minutes until the respective Hopper is rinsed.