Cebora 448.00, Инструкция по эксплуатации

Страница: 21 / 24

3301070/C 19/09/2022
CEBORA S.p.A.
21
IT
Mappatura segnali.
EN
Signals mapping.
ES
Mapeo señales.
RAI448 MIG Note TIG / PW Note
DIG_IN0 weld_start Active high weld_start Active high
DIG_IN1 robot_ready Active high robot_ready Active high
DIG_IN2 op_mode_0 Active high op_mode_0 Active high
DIG_IN3 op_mode_1 Active high op_mode_1 Active high
DIG_IN4 op_mode_2 Active high op_mode_2 Active high
DIG_IN5 op_mode_3 Active high op_mode_3 Active high
DIG_IN6 error_reset Active high error_reset Active high
DIG_IN7 gas_test Active high gas_test_plasma Active high
DIG_IN8 job_0 / prg_0 Active high job_0 Active high
DIG_IN9 job_1 / prg_1 Active high job_1 Active high
DIG_IN10 job_2 / prg_2 Active high job_2 Active high
DIG_IN11 job_3 / prg_3 Active high job_3 Active high
DIG_IN12 job_4 / prg_4 Active high job_4 Active high
DIG_IN13 job_5 / prg_5 Active high job_5 Active high
DIG_IN14 job_6 / prg_6 Active high job_6 Active high
DIG_IN15 not used Active high pilot_arc_start Active high
DIG_IN16 wire_inch Active high wire_inch Active high
DIG_IN17 wire_retr Active high wire_retr Active high
DIG_IN18 touch_sensing Active high touch_sensing Active high
DIG_IN19 blow_thru Active high gas_test_shield Active high
DIG_OUT0 collision_protection Active low pulse_sync Active high
DIG_OUT1 power_source_ready Active high power_source_ready Active high
DIG_OUT2 process_active Active high process_active Active high
DIG_OUT3 current_flow Active high current_flow Active high
DIG_OUT4 main_current Active high main_current Active high
DIG_OUT5 sticking_remedied Active high pilot_arc_on Active high
AN_IN0 welding_power (speed_setpoint) 0
÷
10V welding_power (current_setpoint) 0
÷
10V
AN_IN1 arc_length_corr /speed_corr 0
÷
10V pulse-freq / wire_speed_high 0
÷
10V (DIP4-1)
0÷5V or
0÷5V or
0÷10V or
4÷20mA
(position DIP2)
AN_OUT0 V_arc_meas
0÷10V or
4÷20mA
V_arc_meas
(position
AN_OUT1 I_arc_meas DIP2) I_arc_meas