Ceasa Kivu LCD UF HF 160, Инструкция по эксплуатации

Страница: 61 / 116

Regeneration: Adjustment of cycle times
The times of regeneration cycles have been pre-programmed by the manufacturer of softener. However, you can
modify the advanced programming mode as follows.
Setting the first cycle (Backwash)
From the previous state, press the DOWN key until the
program 2
, which is the length of
backwash
is displayed.
Press the "Validation" for adjusting the first cycle key. With the help of the UP and DOWN keys set the duration
of the
backwash
of the softener. (According to the
Annex II
).
Press "Validation" to confirm.
Setting the second cycle (Brine and slow rinse)
Press DOWN for adjusting the second cycle. The indicator light will mark the
program 3
, which corresponds to
the time of
“brine and slow rinse”
.
Press the "Validation" for adjusting the second cycle key. With the help of the UP and DOWN keys indicate time
of
brine and slow rinse
(According to the
Annex II
).
Press "Validation" to confirm.
Setting the third cycle (Brine refill)
Press DOWN for adjusting the third cycle. The indicator light will mark the
program 4
, which corresponds to
the time of
"Brine refill"
.
Using the "Validation" button, and with the help of the UP and DOWN keys select the loading time of
brine
refill
. (According to the
Annex II
).
Press "Validation" to confirm.
Adjusting the fourth cycle (Fast rinse)
Press DOWN for adjusting the fourth cycle. The indicator light will mark the
program 5
, which corresponds to
the minutes of
"Fast rinse"
.
Using the "Validation" button, and with the help of the UP and DOWN keys dial the
fast rinse
. (According to the
Annex II
).
Press "Validation” to confirm.
Days between regenerations H-
We press the DOWN key and appears H- (days between regenerations)
61 NASSER - CEASA