CE+T Power BRAVO 10 - 48/120, Руководство пользователя, Страница: 23 / 59

6.4.4 Split phase or Single phase configuration - 240 Vac
A split-phase system is 120 Vac from L to N, and 240 Vac from L1 to L2 and L1 and L2 are phase-shifted by 180 degrees.
A shelf can be configured as Split-phase. To do it, remove the two jumpers and connect AC cables in the terminals as
per the below image.
Note:
If the Split-phase is designed with two shelves,
the Jumpers (J1 and J2) should be present
on both shelves.
For connection details, refer to sections 14.2.5, page 55 and 14.2.6, page 56. In each phase, the number of
modules should be equal.
DC -
DC +
AC OUT AC IN
L1 PE
(AC OUT) L2 L2 (AC IN)
N N
PE L1
Jumpers are removed
6.4.4.1 Split phase configurations with Inview Slot and S
Split phase with Inview Slot - 4 kVA
Phase 1 Phase 2
Split phase with Inview Slot - 8 kVA
Phase 1
Phase 2
Not
Used
Phase 1
Split phase with Inview S - 10 kVA
Phase 2
System Installation
23 - Bravo 10 - 48/120 - User manual - v1.1