4. At this time, the date will still show 1970, so press the SETUP key on your
remote control to exit the setup menu and then reboot the device.
Turn off the power switch, wait a few seconds and turn it back on.
5. After reboot, go back to the Misc1 category in the setup menu to
check if the date and time are correct.
If it does not work, try some of the following tips:
• Reboot the unit by turning off the power switch and try again.
• Make sure the unit has access to the internet.
• Set the IP and DNS address manually.
• Ping all the NTP servers from your computer and select the one with
the fastest reply time.
• Use the wired connection instead of wireless and try again.
Misc3 Category
In this category, you can disable the onscreen messages (OSD) and configure
the options for the scrolling text message.
Use the arrow keys on your remote control for navigation and the ENTER button
to configure the settings.
[OSD] Option to enable or disable the on-screen messages (OSD). By default, it
is enabled but if you prefer not seeing the OSD messages during playback, it
can be turned OFF here.
Future Release Features
[Scrolling Text] Turn the scrolling text message ON or OFF. When turned on, a
text file “message.txt” has to be placed on the local hard drive for it to display
the message.
[Scrolling Text Speed] Set the scrolling speed from 1-10, where 1 is the slowest
and 10 the fastest.
[Color] Choose between several different colour schemes for the font and
background to be used for the scrolling text message.
