CHAPTER 4 - PLAYBACK
A hard drive or CF card is installed and data is stored on the HD-300ZX.
Each unit has its own storage but new content can automatically be
downloaded at a certain time over the internet (WAN) from a server.
Advantage: Uninterrupted data playback is guaranteed, as all files are
stored on the local drive. New data can downloaded from a server
using CCM Enterprise, or locally using Quicksign 300.
The content on the local drive can be updated in several different
ways:
Disk Management
To manage the data on the local hard drive and to update the files with
new content, access the file copy and erase command in the MISC2
category.
File Copy
1. Press the SETUP button and go to File Copy in the MISC2 category.
2. Choose one of the functions and press ENTER to start the copy
process.
3. The copy status will be displayed on screen and once finished, it will
return to the main screen.
Note: Only files in the root directory will be copied. Any existing files with
the same file name will be overwritten.
Misc2 Category
In this category, you can manage your files using the copy and erase functions
and set the playback mode for automated playback.
Use the arrow keys on your remote control for navigation and press the ENTER
button to configure the settings.
[File Copy] Use this to easily and quickly copy new files to or from your local
drive. This will copy all files found in the root directory of either your local drive
or the remote location but does not include any sub-folders. Existing files with
the same name will be overwritten.
[File Erase] This function can be used to erase all data on the local drive or one
of the attached USB drives.
[Setup Value] Use this function to reset all settings to their factory default value.
We recommend resetting it after every firmware upgrade.
[Play Mode] Select your preferred play mode from 4 different types:
Standard
- Default setting for standard media player with user input via remote
control.
Repeat
- Automatically plays and repeats all files stored in the root directory at
boot up.
Manual
- Plays title file at boot up as well as after user input via numeric
buttons 000-999.
Standby
- Plays title file at boot up and then waits for further user input (buttons
000-999).
[Remote Command Path] Define the location that the HD-300ZX should monitor
for remote commands. Set it to HDD if you intend to use Quicksign 300 or CCM
Enterprise.
[Auto ON/OFF] Turning this function ON, allows you to set a time for the unit to
automatically turn ON and also a time for it to turn OFF again. NOTE: Must be
connected to the internet for this feature to function properly.
