CDVI GALEO/W, Руководство по установке

Страница: 13 / 24

13
cdvi.com
cdvigroup.com
1
4 2
3
1] GENERAL INFORMATION
3] MOUNTING KIT
2] NOTES AND RECOMMENDATIONS
Fitting
To optimise the mounting of the GALEOW and to combat
attempted tampering, it should be fi tted on a fl at surface.
Recommended power supplies
- A power supply independent of the central controller
is necessary for the GALEOW.
- There are two suitable power supplies for this
Digicode
®
keypad: ARD12 or BS60
Installation recommendations
To protect the installation, remember to:
- install the varistor in parallel on the locking
system power supply side,
- install a 120 ohm resistor between A and B
on the last BUS RS485 door controller.
2
S5 plastic
anchor
4] MOUNTING
After having verifi ed that the fi tting kit is complete and having made the connection of the GALEOW coded
keypad (with or without the door controller depending on whether you use a central controller or panel), you
can proceed with the fi nal installation of the product. Collect up the necessary tools (drill, screwdriver, measuring
tape, etc) and follow the GALEOW fi tting instructions:
Confi rm the distance between
the GALEOW and central
controller or door controller
(see page 3 «Reminders and
recommendations»). Mark
out the locations and drill two
mounting holes (Ø 5 mm drill
bit and minimum depth =
35 mm) as well as the hole
for the keypad’s electric cable.
Fix the GALEOW on its support
using the TORX
®
screw and its
special tool (elbow male screw
spanner). Apply the screw cap
to complete the installation of
this product.
Insert the 2 plastic anchors
in the holes. Mount the
back plate of the GALEOW
on your chosen support
using the supplied (M4x30)
mounting screws.
Insert the GALEOW electric
cable through its cable hole
and attach it to its support
from above with the top
hook.
5] CONNECTIONS: DIRECT CONNECTION TO THE TERMINAL BLOCKS OF A CONTROLLER
Controller terminal wirings
GALEOW Outputs
CTV900A
(CENTAUR)
AC22
(ATRIUM)
UCA3
PROMI1000
PROMI1000PC
PROMI500 DGPROX DG502
RED
Input voltage
12VDC
+12V +12V
BLACK 0V R2/0V GND
BROWN
Buzzer command
input
OUT5/6 BUZ
GREEN DATA 0 R2/D0 D0
WHITE DATA 1 R2/D1 D1
BLUE CLOCK 6 and 10 1 1 1 1 and 6
GREY 0V COMMON 5 and 9 M M M 4
EN EN
GALEOW
Illuminated keypad - Wiegand
GALEOW
Illuminated keypad - Wiegand
INSTALLATION MANUAL
EXE-CDVI_IM GALEOW CMYK A5 EN-FR 07.indd 13 12/07/13 11:32