CDVI DGA, Руководство пользователя

Страница: 3 / 22

EN EN
DGA
Keypad DGA
3
cdvigroup.com
DGA
1 1 1 2 2
1
(X2)
(X2)
2
Digicode
3
05D 680K
Varistor
Spanner
for Torx
®
T20 screws
M4x10
Torx
®
screw
M4x30
screws
S5 plastic
anchor
4] MOUNTING INSTRUCTION
Once you have made sure that the mounting kit is complete and that you prepared the cables
of the DGA keypad then you can proceed and mount the product. Make sure that you have
all the appropriate tools (drill, screw drivers and a meter tape...) and follow the mounting
instructions of the DGA keypad.
Take the marks with the back plate
of the DGA. Drill the 2 mounting
holes (Ø 5 MM bit and 35 MM depth
minimum) and the wiring access
hole.
Insert the 2 plastic anchors. Then
mount the back plate of the DGA
keypad, and screw on the wall with
the (M4x30) mounting screws.
Insert the cable of the keypad in
the wiring access area.
Place the keypad on the back plate
top first and then make sure that it
fits all over the back plate.
fasten the screw at the buttom
of the DGA keypad with the Torx
®
screw using the spanner.
3] MOUNTING KIT 3] MOUNTING KIT