CDP UPO11-1RT, Руководство пользователя

Страница: 23 / 32


13: Maximum charger current setting
Interface Setting
Parameter 2: Set up the charger maximum current.
For low voltage model with 24/36/48VDC
1/2/4/6/8: setting the charger maximum current 1/2/4/6/8
in Ampere. (Default: 2A)
For high voltage model with 24/36/48VDC
1/2/4/6/8/10/12: setting the charger maximum current
1/2/4/6/8/10/12 in Ampere. (Default: 2A)
For low voltage and high voltage model with 72/96VDC
1/2/4/6/8: setting the charger maximum current 1/2/4/6/8
in Ampere. (Default: 2A)
Note: Please set the appropriatecharger current based on
battery capacity used. The recommended charging current is
0.1C~0.3C of battery capacity as following table for
reference.
Battery capacity (AH) Total charging current (A)
7-20 2
20-40 4
40-60 6
60-80 8
80-100 10
100-150 12

14: Charger boost voltaje setting
Interface Setting
Parameter 2: Set up the charger boost voltage.
2.25-2.40: setting the charger boost voltage from 2.25
V/cell to 2.40V/cell. (Default: 2.36V/cell)

15: Charger float voltaje setting
Interface Setting
Parameter 2: Set up the charger float voltage.
2.20-2.33: setting the charger float voltage from 2.20
V/cell to 2.33V/cell. (Default: 2.28V/cell)