CDP UPO11-1RT, Руководство пользователя

Страница: 12 / 32

Step 8: Install software
For optimal computer system protection, install UPS monitoring software to fully configure
UPS shutdown. Use supplied RS-232 or USB communication cable to connect RS-232/USB
port of UPS and RS-232/USB port of PC. Then, follow below steps to install monitoring
software.
1. Insert the included installation CD into CD-ROM drive and then follow the on-
screen instructions to proceed software installation. If there no screen shows 1
minute after inserting the CD, please execute setup.exe file for initiating software
installation.
2. Follow the on-screen instructions to install the software.
3. When your computer restarts, the monitoring software will appear as an orange
plug icon located in the system tray, near the clock.
2-5. Battery Replacement (Only for RT Models)
NOTICE: This UPS is equipped with internal batteries and user can replace the batteries
without shutting down the UPS or connected loads. (hot-swappable battery design)
Replacement is a safe procedure, isolated from electrical hazards.
CAUTION! Consider all warnings, cautions, and notes before replacing batteries.
Note: Upon battery disconnection, equipment is not protected from power outages.