5
Battery Status
If the batteries are exhausted, "
LO
" appears in the display. Press
ON/OFF
key and replace the batteries
immediately.
If the scale is not used for a longer time, take out the battery and store it separately. Leaking battery
liquid could damage the scale.
Operating Instructions
Key
Function
ON/OFF
Turn on/off power of the scale
FUNCTION
Call up menu (keep key pressed until UNIT
appears)
SET/TARE
Confirm settings in the menu
Save and exit menu
Tare weight
UINT/COUNT
Select weighing unit
Change settings in the menu
Parts counting
HOLD/PRINT
Display hold
Calculate weighing data via interface
Change settings in the menu
ZERO
Zero scale
1. Weighing Mode
Turn on the scale using the
ON/OFF
key.
The scale will perform self-test for few seconds. When the zero display appears,
the scale is
ready for
operations.
Important:
If the display not showing zero, press the
ZERO
key.
Place objects onto the center of platform. Take care that the weighed material should not touch the
scale housing.
Now the weight is displayed. Once the reading is stable, the weighing unit (e.g. g or kg) will appear on
the right-hand side of the display. If the objects are heavier than the weighing capacity, the display will
show "
Error
" (=Overload).
2.Tare
Turn on the scale using the
ON/OFF
key and wait for the zero display.
Put the tare vessel on the platform and press the
SET/TARE
key. The scale display goes to zero. The
weight of the vessel is now saved.