28
Power configuration
This hob can be connected to a 13, 16, 25 or 32Amp supply and
configured to work on any of these power settings.
If the hob is connected to a 32 Amp supply all four zones can be
used on the maximum setting with boost at the same time. If, however,
the hob is connected and configured to a 13 Amp supply and all four
zones are selected at the same time the hob will limit the maximum
power consumed so that the 2.8kW power supply cannot be
exceeded (see page 21 for more information).
To configure the hob at first switch on (within 5 minutes)
1. Switch on the power supply.
2. Touch and hold the “
” and “
” keys
on the left side of the
control panel
simultaneously for approximately 3 seconds.
3. Touch the rear left zone “-” and “+” keys to cycle through the
options, shown as 2.8, 3.7, 6.0 and 7.4. Within 10 seconds of
selecting the desired setting, touch and hold
for the rear left
zone for approximately 3 seconds to confirm. You should hear
a beep and the selected power setting will flash 3 times on the
display and the appliance will turn off. Your hob should now operate
at the set power setting.
IMPORTANT: If you do not confirm the selected maximum power
setting, your hob will turn off and operate with the previously
selected power setting or at the default power of 7.4kW. Ensure
the power setting you requires flashes 3 times when properly set
as per step 3.
