18
Safety Key Lock
To prevent accidental use, the hob has a safety key lock which
switches controls off temporarily or completely. The safety key lock
can be activated when the hob is turned on but not when power has
been switched off at, or the appliance disconnected from, the mains.
Disconnecting the appliance from the mains will deactivate the safety
key lock.
To switch on the lock, simply press and hold the safety key lock
sensor ( ). The safety key lock indicator will illuminate. Only the on/
off sensor will now be active. Switching the hob on will prompt ‘Lo’
(locked) to appear on the display.
To switch off the lock, simply press and hold the safety key lock
sensor ( ). The safety key lock indicator will extinguish.
Residual Heat Indicator
The hob is equipped with residual heat indicators to warn when any
of the zones are still hot to the touch after use. An “ ” will show in a
zone’s indicator if the relevant zone is between approximately 45°c
and 60°c. An “ ” will show if the relevant zone is approximately 60°c
or above. You should avoid touching any zone whilst the hob is in use
or whilst either residual heat indicator is displayed.
In the event of a power cut or failure, the residual heat indicators will
illuminate after the power supply is restored. When there is no power
supply to the hob however the residual heat indicators will not work,
yet the hob zone(s) may still be hot, so extra care must be taken.