10
Booster
The hob is equipped with a booster function on all zones, allowing a
higher power level than the maximum for approximately ten minutes.
To activate the booster on a zone
•
Touch the desired zone's booster function sensor (3). "P" will show
in the cooking zone indicator to show that the booster is on.
•
The booster function automatically deactivates after 10 minutes of
usage. The cooking zone will continue to operate at its nominal
power at this point. The booster can be reactivated after this time
provided the hob's internal components have not overheated.
To deactivate the booster on a zone
•
To cancel the booster at any time, touch the desired zone's booster
function sensor (3) or use the ‘+’ and ‘-’ adjustment sensors to return
the heat a different setting.
Please note:
The booster function cannot be used on all cooking
zones at the same time. This is to prevent damage to the internal
modules caused by overheating.
If the appliance's electronic circuits or induction coils overheat
whilst the booster function is in operation then the function will be
automatically deactivated and the zone will continue to operate at its
nominal power. The booster function will be available again once the
internal components have been cooled sufficiently.
It is normal for a high pitched whirring noise to begin whilst the
booster function is in use. This is the cooling fan(s) inside the hob