CD-R King DP321, Руководство пользователя

Страница: 34 / 50

DP321 User's Manual
- 28 -
„
Input the setup menu system
1. The printer is in online mode (
ONLINE
light is on). Holding the
LOAD/EJECT
key for 3
seconds.
z The power light and online light blink twice at the same time to indicate enter into the setup
menu mode.
z Firstly, the printer prints out the title and main menu, as shown below. The underlined items are
the default settings. The print head stays under the default settings.
2. Use the
LOAD/EJECT
key to point the print head to the desired setting.
Use the
L F / F F
key to enter submenu or confirm the current setting
Note: The newly settings are shown in boldfaced.
Use the
ONLINE
key to go back the previous menu (Press and hold the
ONLINE
key to go
back the main menu).
Press and hold the
TEAR
key to save settings and exit.
3. After finish setting, turn off the printer directly to give up the modified setting; or press the
TEAR
down to save the setting and exit the setup menu setting.
4. Turn off the printer, and turn on again.
3.2.2 Online-aptitude Parameter Settings
DP321 supports the function of online-aptitude parameter settings, which can be set in the PC
with the driver installed in.
The concrete setting steps are shown as follows:
1. Make sure that the host and the printer are connected with a cable and both the host and the
printer is turned on, the printer should be online as well.
2. Click “Start” → “Settings” → “Printers”.
3. Right click “CD-R King DP321” in the “Printers”, select “Properties”.
4. Click “Device Property” in the property page.
Figure 3-20 Setup menu system
SETUP MENU SYSTEM
Use the
LOAD/EJECT
key to point the print head to the desired setting.
Use the
L F / F F
key to confirm the current setting
Use the
ONLINE
key to go back the previous menu (Press and hold the
ONLINE
key to go
back the main menu).
Press and hold the
TEAR
key to save settings and exit.
Current settings are New settings will be
boldfaced
.
CHARACTER PAGE LAYOUT PRINT SETUP SERIAL I/F
HEAD PIN