CD-R King DP321, Руководство пользователя

Страница: 14 / 50

DP321 User's Manual
- 8 -
1.8 Running the Self-test
The built-in self-test function demonstrates that the printer is working properly. You can run the
test with either tractor paper or cut-sheets; this section describes the easier way of ASCII
self-test, with cut-sheets.
Note: You should use paper at least 210 mm (8.3 inches) wide to run the self-test;
otherwise, the print head prints directly on the platen.
1. Make sure the printer is turned off and the paper-select lever is pushed back to the cut-sheet
position. Raise the paper guide upright.
2. While holding down the
TEAR
button, turn on the printer. Loosen the button after the
POWER
indicator blinks and the
ONLINE
indicator is off, which indicates the printer is out of
paper.
3. Slide the left edge guide until it locked in place at the triangular guide mark. Next, adjust the
right edge guide to match the width of your paper.
4. Slide a sheet of paper down firmly between the edge guides until it meets resistance. The
printer loads the sheet automatically and begins printing when pressing
ONLINE
button.
Figure 1-19 Set paper select lever
Figure 1-20 Start up self test
Figure 1-21 Adjust the right edge guide