CD-R King DP321, Руководство пользователя

Страница: 12 / 50

DP321 User's Manual
- 6 -
1.6.1 Installing the Push Tractor
Take the installing slots on both sides of tractor aim at the installation pin which is in the back of
printer, press forward till it locked into the position. (Shown as the following figure)
1.6.2 Installing the Pull Tractor
If the tractor has been installed in the push position (back of printer), take down the tractor, unpack
the tear cutter, and install the tractor in the pull position. The concrecte steps are as follows.
1. Make sure the printer is turned off, take down the paper guide, and dial the paper-select lever to
the tractor paper position according to follow figure.
2. Take down the push tractor, please follow these steps: Compact the locked piece of the tractor
(shown as the following figure), and pull out the tractor from the printer, take down the printer
cover.
Locked piece
Figure 1-13 Install the push tractor
Figure 1-14 Set paper-select lever
Figure 1-15 Take down the push tractor