CD Automation srl
REVO M
User’s Manual
REVO_M08
46
P037 (H25)
Operative Load Voltage
V
R/W
Function:
This parameter is used to set in volt the operative voltage of the load.
Min/Max:
0 ÷ 1023 (0 ÷ 3FF Hex)
Value:
from 0 = 0V,
To 1023 =1023V.
Default:
0
Example:
-
Note:
-
P038 (H26)
Load nominal Current
A
R/W
Function:
This parameter is used to set the Load nominal Current.
Min/Max:
from 0 = 0A,
To 1023 =102,3 A. for unit up to 90A
from 0 = 0A,
To 1023 =1023A. for unit over 90A
Value:
-
Default:
Max Current of REVO M (if not specified in the Order Code)
Example:
Size of REVO M (Max Current) : 100A
Load nominal Current: 50A
P119
=50.0
Note:
This parameter is necessary to have the correct rescaling inside the unit. For
this reason it's very important specify this value in the order code.
P044 (H2C)
Input type
V
R/W
Function:
Input type selection.
Min/Max:
0 ÷ 255
Value:
Default:
Example:
Note:
P045 (H2D)
Load Type
R/W
Function:
This parameter set firing delay in °
Min/Max:
Value:
0=star
1=star+N
2=delta
3=open delta
Default:
0 (if not specified in the Order Code)
Example:
-
Note:
-
Содержание Revo M 1PH
