CD Automation CD3000E, Руководство пользователя

Страница: 6 / 21

C.D. Automation Srl CD-KP for CD3000E & Multidrive User’s Manual
www.cdautomation.com 6
1.4 Wiring connection
All the wirings are done via the rear terminals,
following the schema.
The supply of CD-KP can be 120Vac or 240Vac and
must be specified in ordering code.
Re-Transmission
of P.V Selected
1 2 3 4 5 6 7 8
RS485
+ -
0÷20mA
4 20mA
0 10V
÷
÷
120Vac
or 240Vac
selectable
A B
1.5 Retransmission selection
In configuration menu it is possible to select which variable to retransmit and the output type:
0÷20mA, 4÷20mA, 0÷10V.
There is also an hardware configuration that must be
done: a jumper must be set near the rear terminals, as
showed in figures on the right.
If the output is configured as 0÷20mA or 4÷20mA, the
jumper must be set as in fig. A (current selection).
If the output is configured as 0÷10V, the jumper must
be set as in fig. B (voltageselection).
Fig. A Current selection
Fig. B Voltage selection