CD Automation CD3000E, Руководство пользователя

Страница: 12 / 21

C.D. Automation Srl CD-KP for CD3000E & Multidrive User’s Manual
www.cdautomation.com 12
2.3 Operator menu (
oper
)
The operator menu can’t be protected by password. It is composed by 5 sub-menus. The
scrolling through the sub-menus is done by pressing the roll key
.
To return to main menu, press together the roll
and up keys.
2.3.1 OP1 sub-menu
By default, in this sub menu are displayed the average power on three phases (upper display)
and the reference (lower display).
The average power can be expressed in watts or kilowatts (see parameter 032 on CD3000E or
Multidrive manual).
The external reference is displayed in percentage (see parameter 008 on CD3000E or
Multidrive manual).
The user can choose the parameters displayed in OP1 sub-menu by changing this setting in
configuration menu (
Conf
).
2.3.2 OP2 sub-menu
By default, in this sub menu are displayed the average current on three phases (upper display)
and the reference (lower display).
The average current is expressed in ampere (see parameter ??? on CD3000E or Multidrive
manual).
The external reference is displayed in percentage (see parameter 008 on CD3000E or
Multidrive manual).
The user can choose the parameters displayed in OP2 sub-menu by changing this setting in
configuration menu (
Conf
).
2.3.3 OP3 sub-menu
By default, in this sub menu are displayed the voltage to the load (upper display) and the
reference (lower display).
The voltage is expressed in volts (see parameter 031 on CD3000E or Multidrive manual).
The external reference is displayed in percentage (see parameter 008 on CD3000E or
Multidrive manual).
The user can choose the parameters displayed in OP3 sub-menu by changing this setting in
configuration menu (
Conf
).
2.3.4 Command sub-menu (
CnD
)
By default, in sub-menu is hidden and the CD-KP will jump directly to alarm sub-menu (see
next paragraph).
The user can enable this sub-menu by changing the value of
ShCo
parameter in configuration
menu (
Conf
):
-
ShCo
=
On
à
the command sub-menu will be displayed
-
ShCo
=
off
à
the command sub-menu will not be displayed
The commands that can be sent to the thyristor unit are two:
-
by pressing together the up and down keys, CD-KP will send the reset command
and
re.st
will appear in lower display.
-
by pressing the up key, CD-KP will send the start command and
star
will appear in
lower display.
The start and reset commands can be found also in command menu (
CnD
).