CD Automation CD3000E, Руководство пользователя

Страница: 4 / 21

C.D. Automation Srl CD-KP for CD3000E & Multidrive User’s Manual
www.cdautomation.com 4
1 CD-KP for MULTIDRIVE and CD3000E
1.1 General description
CD-KP is a panel device allowing to display some operative parameters of thyristor units as
voltage, current, power, reference, alarms, etc.
CD-KP can be configured to select which parameter to display and is possible to execute
commands as start and stop of the connected unit, display and reset of alarms, to change
reference and ramp.
All the menus (exc ept the operator menu) can be protected by password to avoid accidental
change of configuration parameters by unauthorised personnel.
CD-KP has an isolated analog output 0÷10V/0÷20mA/4÷20mA to retransmit parameters’
value as voltage, power and reference.
Working
temperature 0÷45°C (HR<90%)
Supply votage 115-230 Vac ±10% 50-60 Hz
Power drain 3VA
Display 1 LED 7 segments 10mm.
Display 2 LED 7 segments 8mm.
Display 3 LED 7 segments 10mm.
Units featured CD-KP can communicate with CD3000E or Multidrive units via RS-485.
Wirings Extraible 8 poles terminal
Protection Ip30
Communications RS485 Modbus
Retransmission
Isolated 0÷20mA/4÷20 mA, impedance 500
Ω
or 0÷10V, impedance 1K
Ω
.
1.2 Ordering code
CD-KP TYPE/ AUXILIARY VOLTAGE SUPPLY(V)/ MANUAL TYPE
TYPE
• 5 – CD3000E-2PH
• 6 – CD3000E-3PH
• 7 – MULTIDRIVE-2PH
• 8 – MULTIDRIVE-3PH
AUXILIARY VOLTAGE SUPPLY(V)
• 1 – 120V
• 2 – 240V
MANUAL TYPE
• 1 – Italian version
• 2 – English version