CCS PD2 Series, Инструкция по эксплуатации

Страница: 2 / 16

- 2 -
(10) If smoke appears, the product becomes abnormally hot, unusual smells or
sounds are generated, or any other abnormality occurs, stop using the product
immediately and turn OFF the power.
Caution
(1) The products become very hot during use. For this reason, do not use them in a closed
space. If it is necessary to use them in a closed space, provide sufficient cooling in the form
of fans or other cooling devices.
(2) Install products in following locations:
- On a flat and stable locations with minimal vibration
- Well-ventilated places with minimal dust.
- Places free from any water, oil, liquid, chemical, or steam.
- Places free from corrosive or combustible gas.
- Places away from water faucets, boilers, humidifiers, air conditioners,
heaters, or stoves.
- Places that are not subject to sudden temperature changes.
- Places where products can be grounded.
(3) Observe the following items for the Power Supply:
- Always provide dedicated electric power source with stable voltage.
Sharing the electric power source with power devices, such as
inverters, motors, and so on, may cause product to malfunction.
- Disconnect the power plug when the product is not to be used for an
extended period of time.
- Do not place the power cord near a heat-generating device, and do not
allow the power cord to be scratched.
- Do not touch the power cords or connect peripheral devices during
lightning. This may result in electric shock.
2. Overview
This power supply is for exclusive usage with LED lighting made by CCS.
1. The product can control two LED lights in internal mode using the intensity control knobs on the
front panel of the product or in external mode from a PLC, microcomputer, or other device.
2. The external ON/OFF control is available in product.
3. The PD2-3012-2(A) can supply up to 12V at 2.3A (28W) and the PD2-3024-2(A) can supply up to
24V at 1.16A (28W) for CCS LED lighting.
Do not exceed the maximum wattage for the total number of circuits.