1
Introduction
Contents
Contents
Introduction
Introduction
1
1
This product is an interface unit, which is mounted onto the In-Sight5000
series vision sensor from Cognex and used for the CCS light control. This
interface unit controls LED lights principally used for image processing
and industrial inspections.
Contents of this user manual may be changed without prior notice.
Illustrations used in this user manual may differ from actual products.
CCS maintains the copyright on this user manual. Unauthorized transfer or reproduction
is strictly prohibited.
1
2
Introduction
Important information for equipment safety
Name and functions of each part
Interface unit
Trunk cable (for light)
Connector
How to mount
Connecting wires
Operating instructions
Operation panel
External control
External control by In-Sight Explorer
Troubleshootings
Main specifications
Specifications
Dimensional diagrams
RoHS Directive
Warranty information
P2
P3
P5
P5
P5
P6
P7
P8
P9
P10
P13
P16
P25
P27
P27
P28
P29
P30
Checking the interface unit and Its Accessories
Before installing products, please check that all the items shown below are included
in your product package. If any of these items are missing, please contact CCS Inc.
(please refer to the back cover)
Interface unit
Trunk cable (for light)
M4 fixing screws
(4 pieces)
User Manual
こここここここここここここIn-Sight5000こここここここここここここここここここここここここここここここここここ
ここここここここここここここここここここここここここここここここここここここここここここここここここここここここ
ここここここここここここここここここここここここここここここここ
取扱説明書
型式
DIL-5000-WV
In-Sight5000こここここ
ここここここここここここ
Do not use the product by any means in the following situations;
Conditions or an environment not described in this user manual.
For nuclear power control, railways, aircraft, any other vehicles, combustion equipment,
medical applications, amusement devices, or safety devices.
Situation in which there is a large and foreseeable risk to life and/or property, particularly
applications demanding a high level of safety.
This interface unit is directly mounted onto In-Sight5000 series vision sensor.
Since this interface unit shares the power supply with In-Sight5000 series vision
sensor, it requires no conventional LED light power supply. The interface unit is able
to set light intensity in 256 steps with a PWM light control system.
Note: The term “PWM” is an abbreviation of Pulse Width Modulation.
This product may be controlled by its operation panel, In-Sight5000 vision sensor,
PC or compatible control terminal, or external equipments such as PLC.
Light intensity is controlled by serial data reception.
The interface unit enables LED lights to strobe (only when external control is
provided).
*
No overdrive function is provided.
Channel L1 is used for 12V DC output, while Channel L2 is used for 24V DC output.
Both channels are available for individual light control.
Features
Compatible In-Sight5000 Series (mfd. by Cognex)
In-Sight5100, In-Sight5100C, In-Sight5110, In-Sight5400, In-Sight5400C,
In-Sight5400R, In-Sight5401, In-Sight5403, In-Sight5410, In-Sight5410R,
In-Sight5411, In-Sight5413,
