CCS DIL-5000-WV, Руководство пользователя

Страница: 9 / 16

About delay time
It takes 16μs max. response time to react after this interface unit recieves the trigger. If the
delay time is set, it will light after the response time followed by set time delay.
Operating instructions
15
6
Operating instructions
3. Light control and light pulse width setting (R)
This function makes it possible to register light control data (L1 and L2) and light pulse width set
values by scene as well as a maximum of 8 scene data. The scene data registered are saved in
this interface unit.
Header Code
Scene
No.
Light control
data (L1)
Light control
data (L2)
Light pulse
width
Check
sum
Delimiter
@ R 9 999 999 999999 FF CR LF
Registration command
Function Setting procedure
Light control
data
Setting data in the range of
0 to 256 steps with the PWM
control system.
0 step: Light control rate; 0%
256 steps: Light control rate; 100%
Default value: 128 steps, Light control rate 50%
Light pulse
width
Setting pulse width for strobe
light.
The light pulse width can be set in the range of
16 to 100,000μs. However, Setting need to be a
total of 6,250 steps in 16-μs units. If the set time
cannot be divided by 16μs, please round it up.
Example: To set to 500μs,
500/16 = 31.25 (round up to 32)
32X16 = 512
Thus, 512μs is output.
Default value: 100,000
Used to call from this interface unit scenes registered in the “3. Light control and light pulse width
setting” section. Used the scene called as the output data to control lighting. Scenes No. 1 to 8
are called.
Call command
Header Code Scene No. Check sum Delimiter
@ C 9 FF CR LF
4. Scene call (C)
Operating instructions
16
6
Operating instructions
In-Sight
vision sensor
Tool bar ON/OFF
button
External control by In-Sight Explorer
trigger signal
Port No. 0
Port No. 1
Light control data
16μs max.
Delay time
0 to 1008μs
Light pulse width
16 to 100000μs
In-Sight Explorer Window
1. Boot up the In-Sight Explorer.
(1) Select “Open the job” in the “File” menu list.
(2) Select the In-Sight vision sensor connected to this interface unit from the
In-Sight network.
(3)Click on “Offl ine” to set the network to offl ine mode.
Initial setting of In-Sight Explorer