7
To make the f irst Door Phone extension as a normal Extension, program as below
:
Dial #
0000 + 800 #
Door Phone ring assignment
Dial #
0000 + 82 N # - To assign extensions to ring when Door Phone calls.
Where, N= 1
– 6 (Representing the Extension numbers from 601 to 606)
Repeat the program f or up to 3 Extensions maximum except door phone.
Dial #
0000 + 82 # - To clear all programmed extensions f or Door Phone calls.
.
.
Emergency Call
.
When any extension dials # 88, all extensions start ringing. All extensions get connected to the extension who had dialed
the Emergency code. All can talk in conf erence.
.
Extension to Extension call
.
Extension numbers in def ault are f rom 601 to 606 and can be changed to 2 digits, 3 digits or 4 digits numbering as
explained under the heading “Flexible Numb ering”.
.
Flash Time setting
.
The Flash time of the PBX can be changed as described below:
Dial #
0000 + Dial 00 L #
Here, L= 1 (f or 0.8 secs)
2 (f or 1.0 secs)
3 (f or 1.2 secs)
4 (f or 1.5 secs)
5 (f or 1.8 secs)
Def ault: 0.4 Secs
.
Flexible Numbering
.
Extension numbers can be changed to a desired number of 1 digit, 2 digit, 3 digit or 4 digits f rom 11
– 6999.
The numbering can either be 1 digit, 2digit, 3 digits or 4 digits in any combination.
The f lexible number cannot begin with digits 0, 7, 8 and 9.
Procedure
:
Dial #
0000 + 9000 + # (This also resets all the f lexible numbering of the PBX)
Dial #
0000 + 9 N ABCD #
Where, N = Last digit of the original extension number (This original number always remains the one
that is printed on the MDF even if f lexible numbering is done).
ABCD = The new Extension number. For less than 4 digits, dial # at the end Of Extension Number.
If all the new numbers to be made in sequence then f ollowing programming can be done with single program. This avoi ds
lengthy programming:
Dial #
0000 + 9000 L K #
Where, L = Length of new numbers
– 3 digits or 4 digits
K = First digit of the new numbering. If K=2 then the numbering will become 201 (or 2001)
Onwards. Then all those Numbers can be changed through the f ollowing programming.
Def ault: 601,602, to 606
.
Hot Line to Junction
.
Some or all extensions can be programmed to get Junction Line on lif ting the Handset.
To dial internal numbers, dial
on lif ting the Handset. You will get internal dial tone of the PBX.
To program an extension to get a f ree Junction line on lif ting handset ,
Dial #
0000 + 20 N#
Where, N= last digit of Extension numbers that is to be programmed f or Direct Junction Access.
Dial #
0000 + 20 # -
To convert all Extensions in “Hot Line to Junction” mode
Dial #
0000 + 21 N # - To convert NN Extension in normal mode.
Dial #
0000 + 21 # - To convert all Extensions in normal mode.
Note
:
When all Extensions are converted to Hot Line then to get into the Programming mode, lif t Handset
– dial
#
0000
+ Whatever Programming to be done.
Def ault: Normal Mode
.
Hot Line to Extension
.
Some or all extensions can be programmed to get connected to an Extension, on lif ting the Handset.
To dial internal numbers, dial
on lif ting the Handset. You will get internal dial tone of the PBX.
To program an extension in this mode,
Dial #
0000 + 883 N XXXX#
Where, N= last digit of Original Extension numbers that is to be programmed f or this f eature.