11
To reset all the program
of the PBX except Flexible numbering & Junction Enable/Disable to def ault values,
Dial #
0000 + 0000 + #
To erase only flexible numbering
of the PBX, Dial #
0000 + 9000 + #
.
Ring Time Settings
.
Two type of ringing time can be conf igured as explained below
:
Junction Ring to be sensed as disconnected
The PBX senses the Junction line as disconnected af ter 7 secs of the last ring voltage. This time can be reduced or
increased by using the f ollowing program:
Dial #
0000 + 182 TT #
Where, TT= 50 in def ault f or 5 secs delay. Reducing this time could give problem in CLI.
Internal Call Ringing Time
This is the time f or which an extension keeps ringing when an Extension call another Extension.
Program
:
Dial #
0000 + 494 TT #
Where, TT= 01-99 secs (Def ault Value = 99 secs)
.
Troubleshooting
.
Problem Solution
There is no ring on any extension Press RESET Switch (nex t to the relay) on the SMPS card of the PBX, twice.
The Power LED on the f ront panel Re-insert the connectors of the lead that connects
Is ON but there is no dial tone on the SMPS card to the main card of the PBX.
any extension. Re-insert the connectors at both ends of the lead.
.
Technical Specifications
.
Switching
Space Division Multiplexing
Power Supply
Transf ormer type
Input
AC 80V to 260V
Wattage at 220V
10 W
Extension Loop Resistance
Less than 600 Ohms
Ambient Temperature
+5
C to +45
C
Ambient Humidity
95% Maximum
Telephone Sets
Pulse or DTMF dialing Phones
Cabling
2 Core f rom every Telephone set to the PBX
.
Warranty claim details
.
This manual is also your Warranty document and should be preserved along with Invoice copy for claiming
warranty.
Model Number as per the Invoice: . . . . . . . . . . . . . . . . . . . . . . Product S.No.: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Date of purchase: . . . . . . . . . . . . . . . . . . . . . . . . . . Purchaser Name: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..
Purchaser’s Contact No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Purchaser’s Address: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Copper Connections Pvt. Ltd. warrants that this product is manufactured under stringent quality standards, making it free f rom defects in
material and workmanship, as per the following terms and conditions:
1. The limited warranty for the system is valid for a period of twelve months from the date of purchase or fifteen months from th e d a te
of manufacture which ever is earlier.
2. The limited warranty extends only to the original consumer/ purchaser of the product and is not assignable or transferable to any
subsequent purchaser/end user.
3. During the limited warranty period, Copper Connections Pvt. Ltd. or its authorised service netwo rk will repair or replace, a t C o p p e r
Connections Pvt. Ltd. option, any defective product or parts thereof with a new or factory rebuild replacement items and re tu rn th e
product to the consumer in working conditions. No charge will be made to the consumer f or either parts or labour in repairing or
replacing the product. All replaced parts shall become the prope rty of Copper Connections Pvt. Ltd..
4. Repaired product will be warranted for a balance of original warranty period.
5. Upon request from Copper Connections Pvt. Ltd. or its authorised service center, the consumer must provide purch ase receipt or
other information to prove the date and place of purchase.
6. The consumer shall have no benef it or coverage if any of the following conditions are applicable:
a) The product has been subjected to abnormal use, abnormal condition, improper storage , exposure to moisture o r d a m p n e ss,
exposure to excessive temperature or fire etc., unauthorised modifications, unauthorised connections, unauthorised repairs
including but not limited to use of unauthorised spare parts in repairs, misuse, neglect, abuse , accident, alteration, improper
installation.
b) Copper Connections Pvt. Ltd. was not notified by consumer o f the alleged defect or malfunction of the product during the limited
warranty period.
c) The product was used with or connected to equipment not fi t for use with Copper Connections Pvt. Ltd. system or used in o th e r
than its intended use.
