3.2 Unpacking the RRS-2-BE
The RRS-2-BE is placed in a protected condition to allow the unit to be shipped more efficiently and to prevent
damage from occurring. Perform the following steps to unpack the RRS-2-BE and prepare it for operation.
DANGER!
*Do not unpack the RRS-2-BE until your FREE training seminar has been provided. Unpacking
the unit before training may void your warranty. This guide is intended for personnel that
have already received the proper training.
1.
Remove the cardboard cover
by cutting the perimeter at the base with a utility
knife or removing the nails/screws.
2.
Carefully
remove the steel strapping
that secures the remote rack to the pallet
and roll the unit onto the floor.
3.
Inventory the CBS ArcSafe® RRS-2-BE components to ensure nothing is missing.
A CBS ArcSafe® representative will assist with inventory before the FREE training
seminar.
4.
If pneumatic tires are installed on the unit
(optional),
ensure the tires are
inflated to their proper pressure.
5.
Properly attach necessary tooling to the RRS-2-BE.
6.
The CBS ArcSafe® RRS-2-BE is now ready for charging and setting up for
operation.
