TIMED AWNING LIGHT (OPTIONAL)
OPEN DOORS OR PEAKS ANOMALIES
ANOMALIES CHECK
REMOTE CONTROL ACTIVATION
REMOTE CONTROL RESET
TELEPHONE NUMBER SETTING
NOTE: in compliance with existing regulations, the device sends the alarm for a maximum of 10
times; the deactivation of the device resets the count of interventions.
An electronic device enables the timed switching of awning light by pressing button 5 of the remote
control; the light will remain switched on for the period of time set on the PC-540HY control board
(see USER SETTING).
The anomaly is signalled with open doors or peaks and with the ignition key inserted (+ key).
Anomaly messages are:
»
»
»
When activated, the device checks possible anomalies of closing systems and of the volumetric
sensor. These anomalies are signalled with 5 short flashings of the indicators.
Go to the
MANUFACTURER SETTING » on the PC-540HY control board, menu CONFIG.
ALARM N+B/REMOTE CONTROL/ACTIVATION and select
ON ». Press shortly for 3 consecutive
times button 2 of the remote control. When the button is pressed for the third time the flashing of the
indicators indicates that the remote control has been accepted.
This function enables to reset all remote controls (see MANUFACTURER SETTING)
After the resetting, remote controls shall be reactivated (see REMOTE CONTROL ACTIVATION).
Enter
User setting » in the PC-540HY control board, menu
CONFIG » BURGLAR ALARM/TEL.
NUMBER and set the digit with button 5 and confirm the entry by pressing PROG. button no. 4.
- « L/H LKR OPEN
when the left peak is open.
- « R/H-BK LKR OPEN
when the right and/or rear peak are open.
- « DOOR OPEN
when the cab's and/or van's door are open.
«
«
«
«
BURGLAR FUNCTIONS (OPTIONAL)
31
EN
G
LI
S
H
