20 OF 20
is not allowed and as soon as any key is pressed the
instrument will jump back into the Setup Mode to parameter
P110 to verify the settings.
36 RES< 100!
The current combination of capacity P110 and increment P111
result in a resolution less than 100 graduations. This is simply
a warning in case this was not intended.
37 RES< 1!!
The current combination of capacity P110 and increment P111
result in a resolution less than 1 graduation (i.e. the increment
is greater than capacity). This is not allowed and as soon as
any key is pressed the instrument will jump back into the
Setup Mode to parameter P110 to verify the settings.
Miscellaneous Messages
Error Description
EntryError
This error message is the most commonly used. The primary
causes are entering a value preceding a key (such as
[ZERO]
) which is not allowed, entering alpha data for a
numeric selection, or entering a fractional value for an entry
which only accepts whole numbers. Occurs in Setup Mode or
an operational mode
.
WhichTx#?
The instrument is setup with more than one custom transmit
with parameter P991 set for
Prmpt
(Prompt) and the
[PRINT]
key is pressed. The
WhichTx#?
message is asking for a
custom transmit number to be entered. Key in the custom
transmit, then press
[ENTER]
. i.e.
[2] [ENTER]
, for custom
transmit number 2.
Service
There are no user-serviceable items in the GSE 60 Series. Service must be
performed by a qualified service technician only. Attempts to service this
instrument by unqualified personnel may void the warranty
Содержание 465
Страница 1: ...1 OF 20 465 CONTROLLER User s Guide ...
