Cayman Systems 2E-W, Руководство пользователя

Страница: 35 / 170

Cayman 2E-W User’s Guide Configuring Your Cayman 2E-W
November 2000
3-13
To configure the Manual QuickStart window:
1. Enter the name of your Cayman 2E-W in the
System Name
field.
Each Cayman 2E-W is assigned a name as part of its factory
initialization. The default name for a Cayman 2E-W consists of
the word “Cayman-2E” and the serial number of the device. A
device name can be 1-32 characters long and cannot include
spaces or special characters.
2. Enter the identifier for your Cayman 2E-W on your
HomeRF or 802.11 wireless network in the
Wireless ID
field.
HomeRF wireless network – The default HomeRF wireless
ID for a Cayman 2E-W consists of two four-digit numbers,
which are located on the label on the bottom of your
Cayman 2E-W. You must configure other devices on your
wireless network to use this identifier before they can
communicate with your Cayman 2E-W.
802.11 wireless network – The default 802.11 wireless ID
for a Cayman 2E-W consists of the word “Cayman-2E” and
the serial number of the device. You must configure other
devices on your 802.11 wireless network to use this
identifier before they can communicate with your Cayman
2E-W.
3. Enter the IP address of Ethernet Port B in the
Ethernet B
(WAN) Local Address field.
The IP address you assign to Ethernet Port B must not be used
by another device on your network.
4. Enter the subnet mask for the network connected to
Ethernet Port B in the
Ethernet B (WAN) Net Mask
field.
The subnet mask specifies which bits of the 32-bit binary IP
address represent network information. Most sites should use
255.255.255.0
for their subnet mask.