Cayman Systems 2E-W, Руководство пользователя

Страница: 93 / 170

Cayman 2E-W User’s Guide Using the Command Line Interface
November 2000
4-35
PPP link. The integer argument can be any number between 1 and
10. The default value for the
integer
argument is 2.
set PPP module restart-timer integer
Specifies the number of seconds the Cayman 2E-W should wait
before retransmitting a configuration or termination request. The
integer argument can be any number between 1 and 30. The default
value for the integer argument is 3 seconds. You can reduce the
restart timer value if your link is relatively fast (28,800 bps or
greater). Conversely, you should increase the restart timer value for
slow links.
set PPP module connection-type [ instant-on | always-on ]
Specifies whether a PPP connection is maintained by the Cayman
2E-W when it is unused for extended periods. If you specify
always-on
, the Cayman 2E-W never shuts down the PPP link. If you
specify
instant-on
, the Cayman 2E-W shuts down the PPP link after
the number of seconds specified in the
time-out
setting (below) if
no traffic is moving over the circuit.
set PPP module time-out integer
If you selected a connection type of
instant-on
, specifies the
number of seconds, in the range 30-600, the Cayman 2E-W should
wait for communication activity before terminating the PPP link. The
default is 300 seconds.
Port Authentication
You can use the following commands to specify how your Cayman
2E-W should respond when it receives an authentication request
from a remote peer. The settings for port authentication on the local
Cayman 2E-W must match the authentication that is expected by the
remote peer. For example, if the remote peer requires CHAP
authentication and has a name and CHAP secret for the Cayman
2E-W, you must enable CHAP and specify the same name and secret
on the Cayman 2E-W before the link can be established.