Cayman Systems 2E-W, Руководство пользователя

Страница: 63 / 170

Cayman 2E-W User’s Guide Using the Command Line Interface
November 2000
4-5
ROOT Command
Shortcuts
You can truncate most commands in the CLI to their shortest unique
string. For example, you can use the truncated command
q
in place
of the full
quit
command to exit the CLI. However, you would need
to enter
rese
for the
reset
command, since the first characters of
reset are common to the restart command.
The only command you cannot truncate is
restart
. To prevent
accidental interruption of communications, you must enter the
restart
command in its entirety.
You can use the Up and Down arrow keys to scroll backward and
forward through recent commands you have entered. Alternatively,
you can use the
!! command to repeat the last command you
entered.
ROOT Commands
arp nnn.nnn.nnn.nnn
Sends an Address Resolution Protocol (ARP) request to match the
nnn.nnn.nnn.nnn
IP address to an Ethernet hardware address.
clear [yes]
Clears the configuration settings in a Cayman 2E-W. If you do not use
the optional
yes
qualifier, you are prompted to confirm the
clear
command.
configure
Puts the command line interface into Configure mode, which lets
you configure your Cayman 2E-W with Config commands. Config
commands are described starting on page 4-14.
diagnose
Runs a diagnostic utility to conduct a series of internal checks and
loopback tests to verify network connectivity over each interface on
your Cayman 2E-W. The console displays the results of each test as
the diagnostic utility runs. If one test is dependent on another, the
diagnostic utility indents its entry in the console window. For