22
SETTING UP THE CABINET
Si cet appareil, muni d’une fermeture magnétique, est destiné à en remplacer un autre muni d’une
fermeture à ressort, nous vous conseillons de rendre cette dernière inutilisable avant de le mettre au
rebut. Cela évitera que des enfants puissent s’y enfermer et mettre ainsi leur vie en danger.
If this device, which uses magnetic door closing, replaces a device equipped with a spring closing
system, we advise you to destroy the spring closing system before disposing of the old device. This will
prevent children from locking themselves inside it and endangering their lives.
Location
Place your cabinet well away from heat sources (heater, cooker, direct sunlight). For proper operation of
the device, the ambient room temperature should be between data noted in page 22. Outside these
limits, the device will not operate properly.
– Ensure that air can circulate freely behind the device: do not place it too close to a wall, in order to
avoid noise from vibration. Ensure that air can circulate freely all around the device. Insufficient
ventilation will lead to poor operation and increased energy consumption.
Leave at least 2 cm between the walls and the wine cabinet and 3 cm minimum between the rear of the
wine cabinet and the wall. Leave at least 10 cm free space above the device.
– The device must be installed in such a way that the electric plug is accessible. After installing
the cabinet, make sure that it is not resting on the power cord.
– Level the device by using the 2 adjustable feet.
Connecting the power supply
Your cabinet is designed for operation with 230 V single-phase.
It must be connected to a wall socket equipped with earthing and protected by a 10 A fuse in
compliance with the standard NF C15-100 and in compliance with your electricity supplier's
prescriptions.
Important note:
When installing the handle on the glass door, it is mandatory to use the specific seals provided
and screw in without forcing.
Failure to comply with these requirements may result in glass breakage and will not be covered
by the manufacturer's warranty.
SPECIFIC INFORMATION
-
We recommend that you install your wine cabinet in a temperate room.
-
If the inside light remains on, please note that the inside temperature will be higher.
-
Temperature inside the wine cabinet may vary depending on the type and the number of bottles
contained.
-
In order to keep your wines at a stable temperature, avoid leaving the door open for long periods.
-
Do not install your wine cabinet close to a heat source; avoid direct sunlight.
-
In order to guarantee your safety, and to prevent your wine being spoilt, do not place the cabinet in
humid locations.
-
Do not store perishable foodstuffs inside your wine cabinet.
-
The wine cabinet is not designed for use in a garage, outside, or in the open air.
Содержание S119CBE4
Страница 10: ...10 Chargement pour la capacité 27 bouteilles S127CBE4 4 4 4 4 4 4 3 ...
Страница 11: ...11 Chargement pour la capacité 33 bouteilles S133CBE4 5 5 5 5 5 5 3 ...
Страница 25: ...25 Loading for Max capacities Model S S119CBE4 Model S127CBE4 4 4 4 4 3 4 4 4 4 4 4 3 ...
Страница 26: ...26 Model S133CBE4 5 5 5 5 5 5 3 ...