Caviss S119CBE4, Руководство пользователя

Страница: 28 / 30

28
USAGE
Starting up the device
Once the wine cabinet is properly installed, we advise that you clean the inside using warm water with a
low concentration of dishwashing liquid. Do not use abrasives or scouring powder; they may scratch the
surface finish.
USAGE
CAUTION! Wine cabinets are intended only for storing and preserving wine.
IMPORTANT: Your wine cabinet is ideally suitable for holding Bordeaux type bottles of 0.75 L capacity. It
can contain larger bottles; however care must be taken that they do not prevent the door from closing
properly.
-
When closing the door ensure that it does not touch any of the bottles.
-
If you load several bottles at a time, it will take longer before the cabinet reaches the desired
temperature.
-
In order to avoid damaging the door seal, ensure that the door is fully open before moving the
racks along the compartment rails.
Adjusting the temperature
Control Panel
1 2 3 4 5
1 –Stop/start button
2 – Lamp button
3 – Display screen 4 – Button for raising temperature
5 – Button for lowering temperature
To switch the wine cabinet on or off, either press button 1,
The wine cabinet's temperature range is between 5°C and 18°C.
The temperature can be adjusted 1° at a time; adjust the temperature using buttons or to the right
of the temperature indicator
.
To switch the wine cabinet on or off, either press button 2.
The LED light is appropriate for wine preservation. Nevertheless it is advisable to switch the light off
during normal operation.
IMPORTANT: the control panel automatically locks up after 30 seconds. In order to unlock the control
panel and adjust the temperature, press buttons 4 and 5 simultaneously until you hear a beep.
NOTE: the temperature display shows the temperature inside the wine cabinet. When you increase or
lower the temperature, the temperature display will show the
desired temperature. After a few moments,
the temperature display will switch to the real temperature inside the cabinet.