IX – Summarizing Daily Operating Instructions
1. Inspect the system for damage. Clean the inlet strainer. Check oil/fuel levels.
2. Attach all hoses to the unit and connect the feed pump electrical cable.
3. Start the feed pump or alternate water supply and ensure that the system is
primed.
4. Attach the gun to the pressure hose.
5. Make sure that the diver is ready to work and that the gun is submerged in the
water.
6. Apply hearing protection, start the engine and adjust the throttle to “MAX.”
7. Activate the cleaning cavitation stream by squeezing the gun trigger to open or
“on.”
8. Proceed with cleaning.
9. Stop the feed pump.
10. Release pressure from the hose(s) by squeezing the gun trigger to the open or
“ON” position while under water.
11. Remove the gun from the water.
12. Flush the system and rinse the outside of the power unit with fresh water.
Page -
12
CaviBlaster 1228-G Operations Manual
For More information please email [email protected] or all 1-(352)275-5319
