8
4.
Automatic Watches
· Operating instructions
Caliber 7750
SETTING THE TIME
1. Pull out the crown completely to position (p2): the seconds hand stops.
2. Set the time by turning the crown in the desired direction.
3. Push the crown back in completely to position (p0): the seconds hand starts
again, allowing perfect synchronization with a time signal.
SETTING THE DATE AND THE DAY
1. Pull out the crown to position (p1).
2. Turn the crown clockwise to set the date and counterclockwise to display
the desired day.
3. Push the crown back in completely to position (p0).
USING THE CHRONOGRAPH / START-STOP FUNCTION
Timing a single event:
1. Press button : the chronograph starts.
2. Press button : the chronograph stops.
3. Press button to reset to zero.
Note: Before you start timing, the hands should be reset to zero.
If necessary, press button .
CUMULATIVE TIME FUNCTION
This measures successive times. Each result is added to the previous one.
1. Press button : the chronograph starts.
2. Press button again: the chronograph stops.
Repeat these two steps as many times as desired. At the end of the last
measurement, the chronograph displays the total of all the times
measured. Press button to reset to zero.
