6
3.
Mechanical Watches
· Operating instructions
Caliber 6497-1 6498-1 2801-2 UNITAS 6565
Mechanical movement. The most traditional of movements in
watchmaking is the mechanical one. To ensure that the watch
does not stop, it must be wound regularly – once a day.
SETTING THE TIME
1. Pull out the crown completely to position (p2).
2. Set the time by turning the crown in the desired direction.
3. Push the crown back in completely to position (p0): the seconds hand starts
again, allowing perfect synchronization with a time signal.
SETTING THE TIME
1. Pull out the crown completely to position (p2): the seconds hand stops.
2. Set the time by turning the crown in the desired direction.
3. Push the crown back in completely to position (p0): the seconds hand starts
again, allowing perfect synchronization with a time signal.
SETTING THE DATE
1. Pull out the crown to position (p1).
2. Turn the crown clockwise to set the date.
3. Push the crown back in completely to position (p0).
Caliber 2804-2
