5
2.
Quartz Watches
· Operating instructions
Quartz movement. The electrical energy provided by the battery causes
the quartz in the interior of the watch movement to oscillate 32,768 times
per second. This high frequency gives great accuracy. The seconds hand
advances in steps. Important : Do not leave the crown in position (p1)
for longer than 20 minutes, as this might interfere with the time function.
SETTING THE TIME
1. Pull out the crown completely to position (p2): the seconds hand stops*.
2. Set the time by turning the crown in the desired direction.
3. Push the crown back in completely to position (p0): the seconds hand starts
again, allowing perfect synchronization with a time signal.
* stop seconds according to model
SETTING THE DATE
1. Pull out the crown to position (p1).
2. Turn the crown clockwise to set the date.
3. Push the crown back in completely to position (p0).
SETTING THE UNIVERSAL-HOUR INDICATOR
1. Pull out the crown to position (p1).
2. Set the universal-hour indicator disk by turning the crown in the desired
direction.
3. Push the crown back in completely (p0).
