CATH-TECH CI-100TS, Руководство по эксплуатации

Страница: 18 / 24

Revised July 2020 CI-100TS Current Interrupter Manual 16
To save changes, the user must tap the Forward button. The inserted data will be saved and following
message will be shown:
Relay Setting
This allows the user to define if the rectifier output is held either ON or OFF when the program is not
interrupting the rectifier. The following page will be shown:
To toggle the relay hold status during idle time, tap the yellow button.
Common practice is to hold the Cathodic Protection (CP) on when interruption is not needed. This
maintains the protection on the pipe or structure. If additional CP is required for a special survey
(i.e. DCVG) then it may be desired to hold the additional CP off when not surveying.