CATH-TECH CI-100TS, Руководство по эксплуатации

Страница: 11 / 24

Revised July 2020 CI-100TS Current Interrupter Manual 9
Add new program
This screen will display all existing programs and their activity state. It lists the program
parameters and allows the user to enter a new program.
In the above screen, there are two different programs and only one of them has been activated. The
program number in green
specifies activated programs whereas a grey button indicates that the
corresponding program is dormant.
Note: If there are more than three programs in the unit, a forward arrow icon will appear and by
taping this icon the user can move on to the next page and see the other programs listed (a
maximum five programs are definable)
In order to define a program(s) and operate according to defined program(s), the following steps
must be done:
1. Define program
2. Activate defined program (page 13)
Define New Program
In order to define a new program, the user taps the ADD button and enter the desired program
information. The following information must be inserted for each program:
•
Cycle Information including Total Cycle time, OFF time, ON time, on/off First
•
Start date and time of operation
•
End date and time of operation
•
Which days during week program runs
Navigation
At any time, the user can tap the Back arrow to exit program creation. The user can also tap the
Operations icon to begin interrupting immediately. Once the icon is tapped, the following message
will appear: