![Cateye Air GPS Скачать руководство пользователя страница 3](http://html.mh-extra.com/html/cateye/air-gps/air-gps_instruction-manual_2573976003.webp)
Cover,
Introduction
2/2
3
Introduction
•
Accessories
Charging the Air GPS
Connect the Air GPS to a commercially available USB charger or PC
using the USB cable.
When charging starts, the battery icon will be displayed.
Approx. 3 hours
Standard
charging time
USB cable
Connect to PC or USB charger
Battery icon
Charge screen
Rubber cover
Caution!:
Keep the rubber cover firmly in place to maintain waterproofness.
* If charging starts during measurement, the measurement will be terminated and saved.
Please charge the Air GPS before or after measurement.
* If the battery icon is not displayed, disconnect and reconnect the USB cable repeatedly
until this icon is displayed.
* The standard charging time is approximate and will vary according to environmental and
user conditions.
* When fully charged, the device can be used for about 10 hours.
* Even with a full charge, allowing the unit to stand for a long period of time will consume
the battery because of the standby current.
Charging via a PC
•
When your PC is in the sleep state, the battery cannot be charged.
•
Before disconnecting the USB cable, perform Safely Remove Hardware process for
[GPS100] on a PC.
* When the Air GPS is connected to a Mac, the [GPS100] icon may still be displayed
on the screen even after the removal procedure. Regardless of the displayed [GPS100]
icon, the USB cable can be disconnected after the removal procedure.
Bracket band
Magnetless
cadence sensor
(CDC-30)
Sensor
rubber pad
Rubber band
(Large/medium/small)
Nylon tie x1
Lithium battery
(CR2032)
Air GPS + magnetless cadence sensor (CDC-30) set includes these parts.
Bracket
Dial
USB cable
(MICRO USB)
Start Guide
Bracket
rubber pad