SECTION 2:
Connecting to power supply - Applies to Electric and Dual Fuel Models.
2.
4.
3.
1.
Thread electric supply cable through the Removable Base
section, either through the side or through the bottom.
Elements are located at opposite corners of the arched rail.
Attach the Removable Base Section to the floor, ensure it is
in the correct location. For dual fuel models ensure that the
incoming water feeds are located correctly.
Connect the cable to the element in the towel rail. For electric
models, fit the towel rail to the plugs inserted in section 1. For
dual fuel models, continue to section 3.
For electric models, test the rail.
IMPORTANT: Electric elements should be fitted only by a
suitably qualified electrician and must be earthed and
connected to a cable outlet in the bathroom in accordance
with I.E.E wiring regulations. The electrical connection should
be made to a 5-amp fused fixed spur located outside the
bathroom.
INSTALLATION GUIDE
PHONE: +44 1233 840 840
EMAIL: [email protected]
ADDRESS: CATCHPOLE & RYE, SARACENS DIARY, ASHFORD, KENT, TN27 0SA
WWW.CATCHPOLEANDRYE.COM
©COPYRIGHT 2021 CATCHPOLE & RYE.
ALL RIGHTS RESERVED.
The Original Arched Three Bar Heated Towel Radiator
STANDARD, DUAL FUEL & ELECTRIC MODELS
