Page 3
Sonus E
GA116E – Class 1, Ln’s,
Available in class 1 only, this top of the range model boasts an ultra low noise
floor allowing extremely quiet noise to be measured and recorded.
This model also features dual measurement capability meaning two versions of
applicable parameters can be measured simultaneously. This feature means
you only ever need to measure once to capture all the data you need!
This model is ideal as a dedicated Environmental Sound Meter with full data
logging capabilities recording samples with an interval period as low as one
second … even Ln’s.
Analysis of recorded data can be achieved by transferring the data from the
instrument into the software dBdataPro using the instruments USB port.
Sonus I
GA116I – Class 1
GA216I – Class 2
Available in either class 1 or class 2, this model is a low cost integrating sound
level meter that measures simultaneous Leq and peak measurement for
assessments and compliance with the Health and Safety at work Act; Noise at
Work Regulations 1989.
Sonus B
GA116B – Class 1
GA216B – Class 2
Available in either class 1 or class 2, this model is a general purpose low cost
non-integrating sound level meter that can assist with compliance to the Health
and Safety at Work Act; Noise at Work Regulations 1989.
GA257B –Dose Meter
A low cost dedicated Dose Meter giving a simultaneous Daily Noise Exposure
Level (Lep,d) and peak measurement (Zpk) for assessments to the Noise at
Work Regulations 1989.
