Page 6
Pre-Amplifier Removal and Fitting
Models GA116L, GA116E, GA116I & GA216L-P
To attach the pre-amplifier, position the orientation key on the pre-amplifier
which is identified with a RED mark, with the RED identification mark on the
instrument and gently push the pre-amplifier into the connector. To remove,
gently pull the pre-amplifier stem away from the instrument body.
DO NOT
TWIST THE MICROPHONE STEM
.
Microphone Extension Cable (Models GA116L, GA116E & GA216L)
To attach the microphone extension cable, position the orientation key on the
extension cable connector which is identified with a RED mark, with the RED
identification mark on the instrument and gently push the extension cable into
the connector on the instrument. To fit the pre-amplifier to the extension cable
see
Attaching & Removing the Pre-Amplifier
above.
To remove, gently pull the extension cable connector by pulling on the knurled
part of the stem.
DO NOT TWIST THE MICROPHONE STEM
.