SMART STOP: REBATE BOTTOM THICKNESS MEASURER
The moulding measurement will be displayed in the
MEASUREMENT
key (032.1 for
example). The measurement is validated by touching the
MEASUREMENT
key and it will be
used to compute the required position, if we work with internal size. With external size, the
moulding width doesn’t affect the stop position.
-> In this case, you will need to remove any moulding and let the measurer position itself against
the fixed rule G. Now, still keeping the measurer button pressed down, touch the RESET
MEASURER screen key.
-> If you make a mistake (e.g. a moulding was still in place!), you can start the procedure again
via the MAINTENANCE menu (see page10).
Once the measurer origin is set, put the moulding on the table in front of the left hand vertical
presser and against the moulding guide (rebate towards blades). The execute screen will
appear when the measurer button is touched:
If you are using the SMART STOP, the following warning message appears if the
measurer
button (MP)
is pressed:
Switch the machine on by setting the main switch to ON. (see page 4)
6
MP
0
G
